WiFi WLAN Wireless OBD OBD2 Diagnostic Interface for PC iPhone iPad

WiFi WLAN Wireless OBD OBD2 Diagnostic Interface for PC iPhone iPad

Specifications:

• WiFi OBD can automatically detect and interpret these protocols: ISO 9141, ISO 11898 (aka. CAN), ISO 14230 (aka. KWP2000), ISO 15765(aka. CAN), SAE J1939.
• It also provides support for high speed communications and a low power sleep mode.
• Connecting to your iPhone / iPod touch by WIFI connection in adHoc mode.
• Attached with a 40cm OBDII cable for easy installation.
• Include a power switch to avoid constantly disconnecting your unit from the OBDII port.
• Compatible with 1996 and later vehicles.
• There are plenty of software packages available, which are fully compatible with WIFI OBD, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.
• You can even write your own software on a specified hardware platform if need, because the AT commands are fully documented and very well explained.
• With proper software installed in the host device, you may have following parameters read out from your vehicle:
• Vehicle Speed
• RPM
• Fuel Consumption
• Engine Coolant Temp
• Fuel Pressure
• Calculated Engine Load
• Throttle Position
• Intake Manifold Pressure
• Air Intake Temp
• Timing Advance
• Mass Air Flow
• Fuel Level
• Barometric Pressure
• EVAP System Vapor Pressure
• Fuel Trim
• Note: Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer's implementation.
• Vehicles Supported:
• Our device works on all 1996 to 2010 cars and light trucks including:
• Acura, Alfa Romeo, Ariel Atom, Aston Martin, Audi, Bentley, BMW, Buick, Cadillac, Chevrolet ,Chrysler, Citroen, Daewoo, Daihatsu, Daimler, Dodge, Ferrari, Fiat, Ford, Geo, GMC Holden, Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Lamborghini, Lancia Land Rover, Lexus,Lincoln, Lotus, Maserati, Mazda, McLaren, Mercedes, Mercury, MG, Mini Mitsubishi, Nissan, Oldsmobile, Opel, Pagani, Panoz, Peugeot, Plymouth, Pontiac, Porsche Regal, Renault, Rolls Royce, Roush, Rover, Saab, Saleen, Saturn, Seat, Scion, Shelby Skoda, Smart, Subaru, Suzuki, Tesla, Toyota, Triumph, TVR, Vauxhall, Volkswagen, Volvo, Yugo
• Compatible with:
• SAE J1850 PWM (41.6 kbaud)
• SAE J1850 VPW (10.4 kbaud)
• ISO 9141-2 (5 baud init, 10.4 kbaud)
• ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
• ISO 14230-4 KWP (fast init, 10.4 kbaud)
• ISO 15765-4 CAN (11 bit ID, 500 kbaud)
• ISO 15765-4 CAN (29 bit ID, 500 kbaud)
• ISO 15765-4 CAN (11 bit ID, 250 kbaud)
• ISO 15765-4 CAN (29 bit ID, 250 kbaud)
• Specifications:
• SSID: WiFi OBD/OBD2
• Port: 35000
• Antenna: Internal
• Power Consumption: 0.75 Watts
• Wifi Standard: 802.11a/b/g
• Operating Temperature: -15 to 100 Celsius
• Item size: 15x13x4cm
• Item weight: 5.50oz

Package Details:

1. 1 x WiFi Wireless OBD OBD2 Interface
2. 1 x Software CD