This is a brand new UMTS (WCDMA) 3G cell phone signal booster kit, which works for all WCDMA 2100MHz network in the world. The maximum coverage of this booster is 2000 M�, and it is powerful enough to work on several indoor antennas. The booster can greatly reduce disconnects and drop-outs of your phone calls and can be used with multiple cell phones and data cards simultaneously.

Specifications:

• Frequency range: Uplink 1930~1990MHz, Downlink 2110~2180MHz
• Gain (dB): Uplink Gp≥55; Downlink Gp≥60
• Export power (Po): ≥17dBm
• Pass band ripple: ≤3dB
• I/O impedance: 50Ω/N connector
• Noise figure: ≤4dB
• Transmission Delay: ≤0.5μs
• Ambient temperature: -10°C～60°C
• Power supply: AC110～220V 45～55Hz
• Size: 220 x 180 x 20 mm
• Reliability: To the GB6993-86 standard
• Electromagnetic compatibility: To the ETS300 694-4 standard
• Installation and Working:
• The installation procedure for cell phone boosters may vary according to the product. The
• typical steps involved may consist of the following:
• 1. Identify the most suitable location with the strongest signals, to install the external
• antenna. You can do this by looking at the signal strength indicator on your mobile phone
• handset.
• 2. Use the mounting brackets and to vertically install the antenna, at least three feet
• away from metallic objects like air conditioning units and pipes.
• 3. Take the coaxial cable and attach it to the base of the signal antenna.
• 4. By using an optional window entry kit, you can run the other end of the coaxial cable through your window and attach it to the base unit which is kept indoors.
• 5. Ensure that the base's antenna is at a 90 degree angle to the base unit.
• Connect the power supply to the base unit. You will need to adjust the distance between the two antennas to eliminate any error indications.

Package Details:

1. 1 x Cell Phone Signal Repeater
2. 1 x Power Adapter