Lovely & Smart Digital Baby Monitor With Night Vision Camera 2.5-inch

2.5" TFT-LCD Digital Baby Monitor is an extra set of ears—and in some cases, eyes--that allow you to keep tabs on your sleeping baby. The baby monitor works off a digital signal, which not only ensures a secure line, but also will likely be free of static, buzzing or other noise caused by other electronic devices found in the home. The baby monitor receiver has 4 channel selections that can support 4 different cameras at the same time. And the transmission range of the baby video monitor can be Up to 100m (330ft.) without block. Stylish aesthetics fit with today's home decoration!

Specifications:

• Camera Specification:
• Imaging Sensor: 1/3 inch OMNIVISION Color CMOS
• Horizontal Resolution: 380TV Line
• CMOS Total Pixels: 628 x 582 (PAL) / 510 x 492 (NTSC)
• View Angles: 62 degrees
• Night Vision: 10M
• Minimum Illumination: 0Lux / F2.0 (Auto-ON at night)
• Gain Control: Automatic
• Transmission Power: 10mW
• Consumption Current: 80 mAh
• Modulation Mode: FM
• Bandwidth: 18MHz
• Operating Range: 30m/100m (Obstructed / Unobstructed)
• Power: DC 9V or 9V Battery
•  
• Receiver Specification
• Channel: 1-4 (Flip-type switch)
• Intermediate Frequency: 480MHz
• Frequency Stabilization: +/- 100KHz
• Display: 2.5" LTPS-TFT LCD
• Demodulation Mode: FM
• Power: DC 6V or 4X AAA Battery

Package Details:

1. One camera
2. One 2.5" LCD monitor
3. Two power adapters (5V/802mA DC)
4. One A/V cable
5. One user's manual