GSM/UMTS 900Mhz/2100Mhz Dual Band Cell Phone Signal Booster Repeater 60dB

Designed for use in larger office buildings, warehouses or manufacturing facilities with signal shadowed environments, offers 60dB GSM/UMTS (890~915MHz / 1930~2180MHz) 60dB band and 2000 square meters coverage area. With it, you'll experience fewer dropped calls, faster data rates, and clearer reception.

Specifications:

• Greatly reduces dropped calls, extends signal range, and increases data rates.
• 60dB GSM/UMTS (890~915MHz / 1930~2180MHz) dual band for worldwide use.
• Up to 2000 square meters working range.
• No physical connection to your cell phone or data card.
• Allows multiple phones and cellular data cards to be used simultaneously.
• Oscillation (or interference) detection and automatic shutdown with auto reset.
• Overload protection circuit – protects cell towers from being overloaded.
• Amplifies signals both to and from the cell tower.
• Power control logic ensures maximum gain is within cellular standards.
• Extends battery life – Booster enables phone to work at reduced power.
• Frequency range: Uplink: 890-915MHz / 1930~1990MHz; Downlink:935-960MHz / 2110~2180MHz
• Gain (dB): Uplink: Gp≥60; Downlink Gp≥65
• Export power (Po): ≥27dBm
• Pass band ripple: ≤3dB
• I/O impedance: 50Ω/N connector
• Noise figure: ≤4dB
• Transmission Delay: ≤0.5μs
• Ambient temperature: -10°C～60°C
• Power supply: AC110～220V 45～55Hz
• Size: 220 x 180 x 20 mm
• Reliability: To the GB6993-86 standard
• Electromagnetic compatibility: To the ETS300 694-4 standard
• Installation and Working:
• The installation procedure for cell phone boosters may vary according to the product. The typical steps involved may consist of the following:
• 1. Identify the most suitable location with the strongest signals, to install the external antenna. You can do this by looking at the signal strength indicator on your mobile phone handset.
• 2. Use the mounting brackets and to vertically install the antenna, at least three feet away from metallic objects like air conditioning units and pipes.
• 3. Take the coaxial cable and attach it to the base of the signal antenna.
• 4. By using an optional window entry kit, you can run the other end of the coaxial cable through your window and attach it to the base unit which is kept indoors.
• 5. Ensure that the base's antenna is at a 90 degree angle to the base unit.
• Connect the power supply to the base unit. You will need to adjust the distance between the two antennas to eliminate any error indications.

Package Details:

1. 1 x Cell Phone Signal Repeater
2. 1 x Power Adapter